LLT CONNECTOR SERIES
M45 waterproof connector
Verify pin count, ratings, mounting structure and cable requirements per specific configuration.

Pin positions and structure are confirmed against the drawing specific to the selected configuration.
THE ESSENTIALS
Key specifications
Provide device electrical requirements and installation drawings to confirm the corresponding configuration.
Parameter sources and applicability
Ratings, certifications, and dimensions are confirmed per the selected model. The body dimensions shown do not include device-side mating, cable bend, or tool operating space.
Published parameter summary and limits
| Contacts / locking | Rated voltage | Rated current | Mounting form |
|---|---|---|---|
| 2 pins · threaded | Verify V | Verify A | Wire-to-wire male connector |
| 2 pins · threaded | Verify V | Verify A | Wire-to-wire female connector |
| 3 pins · threaded | Verify V | Verify A | Wire-to-wire male connector |
| 3 pins · threaded | Verify V | Verify A | Wire-to-wire female connector |
| 4 contacts · threaded | Verify V | Verify A | Wire-to-wire male connector |
| 4 contacts · threaded | Verify V | Verify A | Wire-to-wire female connector |
Values apply to the listed configurations separately. Confirm the complete part number, drawing and installation conditions before ordering; a series maximum is not a rating for every variant. The selector above provides configuration-specific details.

LLT · Environmental protection
Water stays out.Connected inside.
From the mating interface to the cable entry, each seal does its part. A stable path for power and signal in outdoor equipment.
Protection applies only after correct mating, locking, and cable sealing are complete. The imagery is an environmental illustration, not footage of actual testing. Applicable conditions ↗
Every mounting, clearly seen.
Another angle.
Understand the structure.
Select mounting and contacts first, then take a closer look at the mating face, wiring back end, and catalog dimensional drawings. The appearance of the same structure can be shared; contact count and pin positions are verified independently.

STRUCTURE, IN FOCUS
M45 · M45 screw-clamp wire
Appearance, mating face and mounting dimensions are verified separately, so every fit is traceable.
Original series image for structural reference; mounting, contacts and the complete part number follow the corresponding product documentation.
Select the matching configuration ›No matching appearance for the current filter combination; adjust the mounting or contact conditions.
M45 selection questions
What should I confirm before ordering M45?
Confirm the contact count and functions, voltage and current for each circuit, cable conductor size and outside diameter, mounting dimensions, mating part and service environment. Use the published parameter table to narrow the choice, then confirm the complete part number and drawing.
Can M45 connectors with the same contact count mate directly?
Contact count alone does not establish compatibility. Check the interface dimensions, keying, contact gender, locking method and pin assignment against the drawings of both mating parts. Confirm the selected pair with samples where required.
How should I interpret the environmental protection of M45?
Use the rating and test conditions stated for the selected configuration. Sealing depends on the specified mating, locking and cable sealing state. A product illustration or a family name does not establish a test duration, immersion depth or certification for every configuration.
How do I request M45 drawings or a cable assembly?
Provide the equipment interface drawing, circuit requirements, cable length and tolerance, conductor size, jacket diameter, termination requirements and installation environment. The engineering team can then confirm the applicable configuration and documents.


