{ "schemaVersion": "7.0", "status": "V7完整参数字典与交接契约；不修改Site现有数据", "snapshot": { "productRows": 1330, "uniqueRecordIds": 1330, "rowsWithSku": 1327, "uniqueSkus": 1327, "familyCount": 29, "variantCount": 80, "expandedVariantPropertyCount": 502, "dictionaryFieldCount": 190, "requirementFieldCount": 33, "sourcePdfSha256": "b2e813d66517b896b8431c654c8359837597e5fe3aa87d722b2dae8e4be48949", "inputs": [ { "file": "selector-products.json", "sha256": "aba6005159d74ae46bb9631fb419f46d60d7fa8222f98f2310deeda042971469" }, { "file": "family-specs-v7.json", "sha256": "f1013a459bd94db05f13b0a44573778c1708e7feccdc2fcd6a84e27badc4f804" }, { "file": "selector-schema.json", "sha256": "d7f0c3e582ecb3cf174ad6005fa570299aaaa06e7d503714229cfd9be86f63f6" }, { "file": "prepare-v7-data.py", "sha256": "c9b270ccbfd3efd8e33e6a66537971bf6861218dbfabbc869890b04a2023a268" } ] }, "units": { "current": "A per contact", "voltage": "V", "conductor": "mm² per core", "cableOd": "mm outer jacket", "dimensions": "mm" }, "rules": [ "所有参数默认未知为null；null不转换成0、空字符串、支持或不支持。", "family.seriesOptions仅用于系列可选型式说明；锁紧/端接/安装的具体SKU要有本列证据。", "作用域必须同时命中SKU/页/芯数/产品列/触点组；未识别约束键不得忽略。广告、family_only、conflicting等证据只展示不硬继承。", "当客户有正向条件但字段未知/冲突，不能进入“已确认匹配”；可单列“参数待确认候选”，注明具体缺失项。", "电流、电压、插拔次数等容量通常按≥需求预选；尺寸按≤可用空间；OD/温度/厚度按区间包容；材料/机制按精确或兼容集合。不得写一个通用所有参数≥需求比较器。", "混合配置每个相关组分别匹配电流、电压、每芯导体和AWG。禁止把组电流相加；禁止用粗线组的容量替代信号组。", "每芯截面积是客户实际值：目录maximum上限≥需求可进入上限预选，下限没写继续null；这不是已确认完整压接/焊接范围或热设计结论。", "OD是整根电缆护套外径，不能拿每芯铜面积、胶圈公称孔径、本体直径或面板适配电缆声明代替。", "IP68与IP69K是独立需求。M19广告IP68、M45 IP67/IP68均缺完整测试条件；不确认持续浸水或高温高压冲洗。", "M29 2/3/4芯重载PDF91–95为50A600V，PDF96明确45A600V，配对额定待确认；5芯20A250V位于PDF97–99，端接栏Solder/Screw为目录选项。未证实M29磷青铜或镀镍金，不从模型颜色/其他系列继承。", "L25有16条料号，5芯目录缺额定表，电流/电压/导体留null；不得用料号20005推定20A。", "所有来源必须显示1起算PDF页；印刷页只是补充标记。料号表/额定表错位、同号多页冲突不能自动以更宽范围合并。", "目录实物照片只是对应列示意，不等于该列所有芯数组的照片；3D资产不能作为材料、IP或SKU参数证据。", "源码和资产交付统一V7；使用本附录及同路径文件名，不读取陈旧V6表覆盖本轮数据。" ], "legacyRulesPreserved": [ "A mixed pin configuration has separate contactGroups. Never sum ratings.", "Minimum required current/voltage must be evaluated against every relevant group, not the series maximum.", "Unknown technical fields are null and cannot pass a positive numerical filter.", "Cable OD, conductor cross-sectional area and grommet nominal bore are different fields.", "A maximum-only cable OD claim is not a verified full seal range.", "Series is a family name, not an actual overall diameter.", "SKU image matching must preserve lock, pin configuration, installation and gender.", "Catalog configuration rows without published order codes are not generated SKUs.", "Rated electrical values do not imply every allowed wire gauge supports full rating under all duty conditions.", "A printed <= conductor value is maximum-only: preserve null minimum and display <=, never invent 0-minimum.", "An exact single wire area without <= is an option, not a continuous range.", "Voltage AC/DC system is null unless the source explicitly states it.", "sourcePage uses 1-based PDF pages; printed-page number is separate.", "Source conflicts suppress the disputed numeric filter value instead of combining a wider range.", "Panel associated mating-cable OD is not a panel seal specification.", "Pin selector options are the exact pinConfig set of the currently selected series; unavailable options are absent.", "Series changes preserve a valid pinConfig and clear an unavailable pinConfig, with synchronized results and URL.", "User conductor area is an actual requirement: a published maximum greater than or equal to it passes upper-limit preselection, not proof of the entire termination range.", "User width and length are available installation space: documented product dimensions must be less than or equal to those limits.", "Every nonempty numerical requirement must be finite and positive. AWG must also be an integer." ], "productFields": [ "additionalSources", "associatedCableOdMmMax", "associatedCableOdMmMin", "branchCount", "cableOdMaxInclusive", "cableOdMmMax", "cableOdMmMin", "cableOdScope", "catalogFamily", "catalogImage", "catalogImageSourcePage", "catalogIpRating", "catalogProperties", "catalogPublishedLocking", "catalogPublishedValues", "category", "certificationScope", "configurationFamily", "configurationId", "conflicts", "contactDiameterMm", "contactGender", "contactGroups", "dimensionNotes", "dimensionsSourcePage", "electricalSystem", "envelopeWidthMm", "evidenceStatus", "fieldEvidence", "grommetNominalMm", "housingGender", "id", "interfaceType", "ipRating", "locking", "lockingOptions", "matingCyclesMin", "maxBodyDiameterMm", "mechanicalLifeCycles", "mounting", "mountingOptions", "nameZh", "operatingTemperatureCMax", "operatingTemperatureCMin", "operatingTemperatureMaxC", "operatingTemperatureMinC", "orderingStatus", "overallLengthIsReference", "overallLengthMm", "panelThicknessMmMax", "panelThicknessMmMin", "pinConfig", "pinCountTotal", "printedPage", "productType", "publishedValues", "series", "seriesSlug", "shellGender", "sku", "socketCount", "sourceFileId", "sourceFileName", "sourceFileSha256", "sourceNotes", "sourcePage", "sourcePageImage", "sourcePages", "sourcePrintedPage", "sourcePrintedPages", "sourceUrl", "temperatureMaxC", "temperatureMinC", "termination", "terminationOptions", "variantExamples", "wireAreaMm2Options", "wireAreaPublishedUnallocated" ], "contactGroupFields": [ "awgMaxNumber", "awgMinNumber", "awgOptions", "catalogPublishedValues", "count", "electricalSystem", "fieldSources", "ratedCurrentA", "ratedVoltageV", "role", "voltageKind", "wireAreaMm2Max", "wireAreaMm2Min", "wireAreaMm2Options", "wireAreaPublished", "wireAreaRelation" ], "familyParameterKeys": [ "automaticSecondaryLock", "awgExact", "branchCableOdMmMax", "branchWireAreaMm2Max", "cableOdMmMax", "cableOdMmMin", "cableOdPublished", "cableOdPublishedByProductColumn", "catalogIpByProductColumn", "catalogIpRating", "certificationScope", "contactDiameterByPinGroups", "contactDiameterMm", "contactMaterial", "contactPlating", "contactResistanceMilliOhmMax", "currentByPins", "currentOptionsA", "electromagneticShieldDb", "electromagneticShieldFrequencyMHz", "flammabilityClass", "housingMaterial", "hvil", "impactAccelerationPublished", "insulationResistanceCondition", "insulationResistanceMOhmMin", "insulatorMaterial", "ipMatedCondition", "ipTestDepthM", "ipTestDurationMin", "ipTestPressureBar", "ipTestTemperatureC", "mainCableOdMmMax", "mainWireAreaMm2Max", "mechanicalLifeCycles", "mechanicalLifeCyclesMin", "operatingTemperatureCMax", "operatingTemperatureCMin", "panelThicknessMmMax", "panelThicknessMmMin", "panelThicknessPublished", "pinCount", "pinCounts", "ratedCurrentA", "ratedVoltageSystem", "ratedVoltageV", "ratings", "ratingsByPin", "ratingsByPins", "relativeHumidityPct", "relativeHumidityTestTemperatureC", "saltSprayHours", "sealMaterial", "vibrationAccelerationMps2", "vibrationFrequencyHzMax", "vibrationFrequencyHzMin", "wireAreaMaxByPins", "wireAreaMm2Max", "wireAreaOptionsMm2", "wireAreaRelation", "wireCurrentPairs", "withstandVoltageSystem", "withstandVoltageV" ], "fieldDefinitions": [ { "path": "product.additionalSources", "key": "additionalSources", "labelZh": "补充来源", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 13, "observedInV7": true }, { "path": "product.associatedCableOdMmMax", "key": "associatedCableOdMmMax", "labelZh": "配对线端电缆外径上限", "unit": "mm", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "仅描述配对线端电缆；不得作为面板端密封OD硬筛选。先解析cableOdScope并定位实际线端SKU。", "filterKind": "associated_od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 18, "observedInV7": true }, { "path": "product.associatedCableOdMmMin", "key": "associatedCableOdMmMin", "labelZh": "配对线端电缆外径下限", "unit": "mm", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "仅描述配对线端电缆；不得作为面板端密封OD硬筛选。先解析cableOdScope并定位实际线端SKU。", "filterKind": "associated_od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 18, "observedInV7": true }, { "path": "product.branchCount", "key": "branchCount", "labelZh": "分支数量", "unit": "分支", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 12, "observedInV7": true }, { "path": "product.cableOdMaxInclusive", "key": "cableOdMaxInclusive", "labelZh": "外径上限是否包含边界", "unit": null, "dataTypes": [ "boolean", "null" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "filterKind": "od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 839, "observedInV7": true }, { "path": "product.cableOdMmMax", "key": "cableOdMmMax", "labelZh": "电缆护套外径上限", "unit": "mm", "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "filterKind": "od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 835, "observedInV7": true }, { "path": "product.cableOdMmMin", "key": "cableOdMmMin", "labelZh": "电缆护套外径下限", "unit": "mm", "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "filterKind": "od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 739, "observedInV7": true }, { "path": "product.cableOdScope", "key": "cableOdScope", "labelZh": "电缆外径适用位置", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "仅描述配对线端电缆；不得作为面板端密封OD硬筛选。先解析cableOdScope并定位实际线端SKU。", "filterKind": "associated_od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 18, "observedInV7": true }, { "path": "product.catalogFamily", "key": "catalogFamily", "labelZh": "目录系列归属", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.catalogImage", "key": "catalogImage", "labelZh": "目录照片路径", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 182, "observedInV7": true }, { "path": "product.catalogImageSourcePage", "key": "catalogImageSourcePage", "labelZh": "目录照片来源页", "unit": null, "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 182, "observedInV7": true }, { "path": "product.catalogIpRating", "key": "catalogIpRating", "labelZh": "目录IP等级原文", "unit": null, "dataTypes": [ "null", "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "按具体IP声明、插合状态与试验条件匹配；IP不是可直接数字排序的标量。IP68不证明IP69K；IP65/IP67备选声明不能自动认为每SKU两者兼得。广告IP68、缺条件或冲突不能硬通过。", "filterKind": "ip", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1260, "observedInV7": true }, { "path": "product.catalogProperties", "key": "catalogProperties", "labelZh": "匹配到该配置的目录属性列表", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.catalogPublishedLocking", "key": "catalogPublishedLocking", "labelZh": "目录原文锁紧方式", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "有冲突字段保留原文与来源，将确认值置null；禁止取较大额定/较宽范围，禁止后来另一条属性重新填回。", "filterKind": "conflict", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "product.catalogPublishedValues", "key": "catalogPublishedValues", "labelZh": "目录原始但未作为确认值的参数", "unit": null, "dataTypes": [ "object" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "有冲突字段保留原文与来源，将确认值置null；禁止取较大额定/较宽范围，禁止后来另一条属性重新填回。", "filterKind": "conflict", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 5, "observedInV7": true }, { "path": "product.category", "key": "category", "labelZh": "目录产品类别", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 199, "observedInV7": true }, { "path": "product.certificationScope", "key": "certificationScope", "labelZh": "认证覆盖范围", "unit": null, "dataTypes": [ "null" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "product.configurationFamily", "key": "configurationFamily", "labelZh": "配置型式分组", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 432, "observedInV7": true }, { "path": "product.configurationId", "key": "configurationId", "labelZh": "非独立料号配置ID", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "只用于标识、文本搜索或精确去重，不参与数值匹配。", "filterKind": "identity", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 429, "observedInV7": true }, { "path": "product.conflicts", "key": "conflicts", "labelZh": "冲突字段及处理结果", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "有冲突字段保留原文与来源，将确认值置null；禁止取较大额定/较宽范围，禁止后来另一条属性重新填回。", "filterKind": "conflict", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.contactDiameterMm", "key": "contactDiameterMm", "labelZh": "接触端子直径", "unit": "mm", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 112, "observedInV7": true }, { "path": "product.contactGender", "key": "contactGender", "labelZh": "接触件性别（插针/插孔）", "unit": null, "dataTypes": [ "null", "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1110, "observedInV7": true }, { "path": "product.contactGroups", "key": "contactGroups", "labelZh": "独立触点负载组", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.dimensionNotes", "key": "dimensionNotes", "labelZh": "尺寸定义与图纸备注", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 255, "observedInV7": true }, { "path": "product.dimensionsSourcePage", "key": "dimensionsSourcePage", "labelZh": "尺寸来源PDF页", "unit": null, "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 255, "observedInV7": true }, { "path": "product.electricalSystem", "key": "electricalSystem", "labelZh": "额定电压AC/DC制式", "unit": null, "dataTypes": [ "null" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "product.envelopeWidthMm", "key": "envelopeWidthMm", "labelZh": "图纸指定方向包络宽度", "unit": "mm", "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "产品已公布尺寸≤客户可用空间；宽度按该图方向，长度按整体长度。参考尺寸需标明，缺失或公差未知只能待确认。", "filterKind": "space", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 313, "observedInV7": true }, { "path": "product.evidenceStatus", "key": "evidenceStatus", "labelZh": "证据类型/审核状态", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.fieldEvidence", "key": "fieldEvidence", "labelZh": "逐字段证据及作用域", "unit": null, "dataTypes": [ "object" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.grommetNominalMm", "key": "grommetNominalMm", "labelZh": "密封胶圈公称孔径", "unit": "mm", "dataTypes": [ "null" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "公称胶圈孔径不是电缆密封范围；仅显示/精确配件检索，禁止当OD区间。", "filterKind": "grommet", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "product.housingGender", "key": "housingGender", "labelZh": "接头外壳性别", "unit": null, "dataTypes": [ "null", "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 597, "observedInV7": true }, { "path": "product.id", "key": "id", "labelZh": "稳定记录ID", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "只用于标识、文本搜索或精确去重，不参与数值匹配。", "filterKind": "identity", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.interfaceType", "key": "interfaceType", "labelZh": "接口类型", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "product.ipRating", "key": "ipRating", "labelZh": "历史/官网IP等级字段", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "按具体IP声明、插合状态与试验条件匹配；IP不是可直接数字排序的标量。IP68不证明IP69K；IP65/IP67备选声明不能自动认为每SKU两者兼得。广告IP68、缺条件或冲突不能硬通过。", "filterKind": "ip", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 30, "observedInV7": true }, { "path": "product.locking", "key": "locking", "labelZh": "具体锁紧机制", "unit": null, "dataTypes": [ "null", "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1198, "observedInV7": true }, { "path": "product.lockingOptions", "key": "lockingOptions", "labelZh": "系列/配置可选锁紧方式", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 3, "observedInV7": true }, { "path": "product.matingCyclesMin", "key": "matingCyclesMin", "labelZh": "筛选用插拔次数（历史Min命名）", "unit": "次", "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "公布插拔次数≥客户循环需求可作目录预选；原文未说Min时不得改成保证下限，须保持寿命试验条件未知。", "filterKind": "life", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 698, "observedInV7": true }, { "path": "product.maxBodyDiameterMm", "key": "maxBodyDiameterMm", "labelZh": "明确最大本体外径", "unit": "mm", "dataTypes": [ "null" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "产品已公布尺寸≤客户可用空间；宽度按该图方向，长度按整体长度。参考尺寸需标明，缺失或公差未知只能待确认。", "filterKind": "space", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "product.mechanicalLifeCycles", "key": "mechanicalLifeCycles", "labelZh": "目录机械插拔次数", "unit": "次", "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "公布插拔次数≥客户循环需求可作目录预选；原文未说Min时不得改成保证下限，须保持寿命试验条件未知。", "filterKind": "life", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 170, "observedInV7": true }, { "path": "product.mounting", "key": "mounting", "labelZh": "具体安装形式", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.mountingOptions", "key": "mountingOptions", "labelZh": "安装选项", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 3, "observedInV7": true }, { "path": "product.nameZh", "key": "nameZh", "labelZh": "中文产品名", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "只用于标识、文本搜索或精确去重，不参与数值匹配。", "filterKind": "identity", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.operatingTemperatureCMax", "key": "operatingTemperatureCMax", "labelZh": "工作温度上限（目录字段）", "unit": "°C", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "filterKind": "temperature", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 199, "observedInV7": true }, { "path": "product.operatingTemperatureCMin", "key": "operatingTemperatureCMin", "labelZh": "工作温度下限（目录字段）", "unit": "°C", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "filterKind": "temperature", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 199, "observedInV7": true }, { "path": "product.operatingTemperatureMaxC", "key": "operatingTemperatureMaxC", "labelZh": "工作温度上限（历史拼写）", "unit": "°C", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "filterKind": "temperature", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 30, "observedInV7": true }, { "path": "product.operatingTemperatureMinC", "key": "operatingTemperatureMinC", "labelZh": "工作温度下限（历史拼写）", "unit": "°C", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "filterKind": "temperature", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 30, "observedInV7": true }, { "path": "product.orderingStatus", "key": "orderingStatus", "labelZh": "订货状态", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 3, "observedInV7": true }, { "path": "product.overallLengthIsReference", "key": "overallLengthIsReference", "labelZh": "整体长度是否参考尺寸", "unit": null, "dataTypes": [ "boolean" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "产品已公布尺寸≤客户可用空间；宽度按该图方向，长度按整体长度。参考尺寸需标明，缺失或公差未知只能待确认。", "filterKind": "space", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 255, "observedInV7": true }, { "path": "product.overallLengthMm", "key": "overallLengthMm", "labelZh": "整体长度", "unit": "mm", "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "产品已公布尺寸≤客户可用空间；宽度按该图方向，长度按整体长度。参考尺寸需标明，缺失或公差未知只能待确认。", "filterKind": "space", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 331, "observedInV7": true }, { "path": "product.panelThicknessMmMax", "key": "panelThicknessMmMax", "labelZh": "适配面板厚度上限", "unit": "mm", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "所选面板厚度/公差区间必须被明确的面板适配范围包容；仅max声明不能补造min。不能与配对电缆OD混用。", "filterKind": "panel", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 428, "observedInV7": true }, { "path": "product.panelThicknessMmMin", "key": "panelThicknessMmMin", "labelZh": "适配面板厚度下限", "unit": "mm", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "所选面板厚度/公差区间必须被明确的面板适配范围包容；仅max声明不能补造min。不能与配对电缆OD混用。", "filterKind": "panel", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 428, "observedInV7": true }, { "path": "product.pinConfig", "key": "pinConfig", "labelZh": "精确芯位配置", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "精确匹配pinConfig（如2+3不能替换为5）；总芯数仅辅助。选项必须来自当前系列实际记录。", "filterKind": "pin", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.pinCountTotal", "key": "pinCountTotal", "labelZh": "总芯数", "unit": "芯", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "精确匹配pinConfig（如2+3不能替换为5）；总芯数仅辅助。选项必须来自当前系列实际记录。", "filterKind": "pin", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.printedPage", "key": "printedPage", "labelZh": "历史印刷页字段", "unit": null, "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 30, "observedInV7": true }, { "path": "product.productType", "key": "productType", "labelZh": "前端产品大类", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.publishedValues", "key": "publishedValues", "labelZh": "来源原文参数", "unit": null, "dataTypes": [ "object" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 30, "observedInV7": true }, { "path": "product.series", "key": "series", "labelZh": "系列名称", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.seriesSlug", "key": "seriesSlug", "labelZh": "系列路由标识", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "只用于标识、文本搜索或精确去重，不参与数值匹配。", "filterKind": "identity", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.shellGender", "key": "shellGender", "labelZh": "来源外壳性别字段", "unit": null, "dataTypes": [ "null", "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 20, "observedInV7": true }, { "path": "product.sku", "key": "sku", "labelZh": "订货料号", "unit": null, "dataTypes": [ "null", "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "只用于标识、文本搜索或精确去重，不参与数值匹配。", "filterKind": "identity", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1327, "observedInV7": true }, { "path": "product.socketCount", "key": "socketCount", "labelZh": "分配器插口数量", "unit": "插口", "dataTypes": [ "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 29, "observedInV7": true }, { "path": "product.sourceFileId", "key": "sourceFileId", "labelZh": "来源文件标识", "unit": null, "dataTypes": [ "null" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "product.sourceFileName", "key": "sourceFileName", "labelZh": "来源文件名", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1323, "observedInV7": true }, { "path": "product.sourceFileSha256", "key": "sourceFileSha256", "labelZh": "来源文件SHA256", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1323, "observedInV7": true }, { "path": "product.sourceNotes", "key": "sourceNotes", "labelZh": "证据与边界说明", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.sourcePage", "key": "sourcePage", "labelZh": "1起算PDF页号", "unit": null, "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1323, "observedInV7": true }, { "path": "product.sourcePageImage", "key": "sourcePageImage", "labelZh": "来源页证据图", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 30, "observedInV7": true }, { "path": "product.sourcePages", "key": "sourcePages", "labelZh": "PDF来源页号数组", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 433, "observedInV7": true }, { "path": "product.sourcePrintedPage", "key": "sourcePrintedPage", "labelZh": "来源印刷页号", "unit": null, "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1293, "observedInV7": true }, { "path": "product.sourcePrintedPages", "key": "sourcePrintedPages", "labelZh": "印刷页号数组", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 432, "observedInV7": true }, { "path": "product.sourceUrl", "key": "sourceUrl", "labelZh": "来源网页或PDF网址", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1330, "observedInV7": true }, { "path": "product.temperatureMaxC", "key": "temperatureMaxC", "labelZh": "筛选用工作温度上限", "unit": "°C", "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "filterKind": "temperature", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 757, "observedInV7": true }, { "path": "product.temperatureMinC", "key": "temperatureMinC", "labelZh": "筛选用工作温度下限", "unit": "°C", "dataTypes": [ "null", "number" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "filterKind": "temperature", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 757, "observedInV7": true }, { "path": "product.termination", "key": "termination", "labelZh": "具体端接方式", "unit": null, "dataTypes": [ "null", "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1304, "observedInV7": true }, { "path": "product.terminationOptions", "key": "terminationOptions", "labelZh": "端接选项", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 45, "observedInV7": true }, { "path": "product.variantExamples", "key": "variantExamples", "labelZh": "配置示例", "unit": null, "dataTypes": [ "array" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 3, "observedInV7": true }, { "path": "product.wireAreaMm2Options", "key": "wireAreaMm2Options", "labelZh": "每芯导体离散规格选项", "unit": "mm²/芯", "dataTypes": [ "null" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "product.wireAreaPublishedUnallocated", "key": "wireAreaPublishedUnallocated", "labelZh": "尚未分配到触点组的导体原文", "unit": null, "dataTypes": [ "string" ], "scope": "具体SKU记录；配置级记录必须保留orderingStatus，不能冒充可订货料号。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 14, "observedInV7": true }, { "path": "product.contactGroups[].awgMaxNumber", "key": "awgMaxNumber", "labelZh": "支持AWG最大编号", "unit": "AWG编号", "dataTypes": [ "null", "number" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "仅用明确发布的AWG编号范围或离散选项；编号比较是区间包含，不能把AWG数值越大理解为导体越粗，不能用mm²换算填充未知AWG。", "filterKind": "awg", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 10, "observedInV7": true }, { "path": "product.contactGroups[].awgMinNumber", "key": "awgMinNumber", "labelZh": "支持AWG最小编号", "unit": "AWG编号", "dataTypes": [ "null", "number" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "仅用明确发布的AWG编号范围或离散选项；编号比较是区间包含，不能把AWG数值越大理解为导体越粗，不能用mm²换算填充未知AWG。", "filterKind": "awg", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 10, "observedInV7": true }, { "path": "product.contactGroups[].awgOptions", "key": "awgOptions", "labelZh": "明确支持的AWG离散选项", "unit": "AWG编号", "dataTypes": [ "array", "null" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "仅用明确发布的AWG编号范围或离散选项；编号比较是区间包含，不能把AWG数值越大理解为导体越粗，不能用mm²换算填充未知AWG。", "filterKind": "awg", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "product.contactGroups[].catalogPublishedValues", "key": "catalogPublishedValues", "labelZh": "目录原始但未作为确认值的参数", "unit": null, "dataTypes": [ "object" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "有冲突字段保留原文与来源，将确认值置null；禁止取较大额定/较宽范围，禁止后来另一条属性重新填回。", "filterKind": "conflict", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 3, "observedInV7": true }, { "path": "product.contactGroups[].count", "key": "count", "labelZh": "该触点组芯数", "unit": "芯", "dataTypes": [ "number" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "精确匹配pinConfig（如2+3不能替换为5）；总芯数仅辅助。选项必须来自当前系列实际记录。", "filterKind": "pin", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1533, "observedInV7": true }, { "path": "product.contactGroups[].electricalSystem", "key": "electricalSystem", "labelZh": "额定电压AC/DC制式", "unit": null, "dataTypes": [ "null" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "product.contactGroups[].fieldSources", "key": "fieldSources", "labelZh": "触点组逐字段来源", "unit": null, "dataTypes": [ "object" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 5, "observedInV7": true }, { "path": "product.contactGroups[].ratedCurrentA", "key": "ratedCurrentA", "labelZh": "每触点额定电流", "unit": "A/触点", "dataTypes": [ "null", "number" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "每个相关触点组分别满足目录额定电流≥客户该组每芯电流；不能跨组求和、不能采用系列最大电流。额定条件缺失时只作预选。", "filterKind": "current", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1266, "observedInV7": true }, { "path": "product.contactGroups[].ratedVoltageV", "key": "ratedVoltageV", "labelZh": "额定电压", "unit": "V", "dataTypes": [ "null", "number" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "每个相关触点组分别满足额定电压≥客户该组电压；还需相同AC/DC及所需条件。AC/DC未标注时不得声称该制式已确认。", "filterKind": "voltage", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1256, "observedInV7": true }, { "path": "product.contactGroups[].role", "key": "role", "labelZh": "触点组用途", "unit": null, "dataTypes": [ "string" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "在具体SKU证据明确时精确/集合匹配；系列选项不能当成所有SKU的能力。", "filterKind": "exact", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1533, "observedInV7": true }, { "path": "product.contactGroups[].voltageKind", "key": "voltageKind", "labelZh": "历史电压制式字段", "unit": null, "dataTypes": [ "null" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "product.contactGroups[].wireAreaMm2Max", "key": "wireAreaMm2Max", "labelZh": "每芯导体截面积上限", "unit": "mm²/芯", "dataTypes": [ "null", "number" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1105, "observedInV7": true }, { "path": "product.contactGroups[].wireAreaMm2Min", "key": "wireAreaMm2Min", "labelZh": "每芯导体截面积下限", "unit": "mm²/芯", "dataTypes": [ "null" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "product.contactGroups[].wireAreaMm2Options", "key": "wireAreaMm2Options", "labelZh": "每芯导体离散规格选项", "unit": "mm²/芯", "dataTypes": [ "null" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "product.contactGroups[].wireAreaPublished", "key": "wireAreaPublished", "labelZh": "每芯导体原文", "unit": null, "dataTypes": [ "null", "string" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1105, "observedInV7": true }, { "path": "product.contactGroups[].wireAreaRelation", "key": "wireAreaRelation", "labelZh": "导体声明关系", "unit": null, "dataTypes": [ "null", "string" ], "scope": "该SKU的一个触点组；count/role与针位图对应，不可跨组继承。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1105, "observedInV7": true }, { "path": "family.variants[].properties[automaticSecondaryLock].value", "key": "automaticSecondaryLock", "labelZh": "自动二次锁扣", "unit": null, "dataTypes": [ "boolean" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅明确适用该SKU且值为true才能满足所需功能；null表示未公布，不按false或true处理。", "filterKind": "boolean", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[awgExact].value", "key": "awgExact", "labelZh": "明确单一AWG规格", "unit": "AWG编号", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "仅用明确发布的AWG编号范围或离散选项；编号比较是区间包含，不能把AWG数值越大理解为导体越粗，不能用mm²换算填充未知AWG。", "filterKind": "awg", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 4, "observedInV7": true }, { "path": "family.variants[].properties[branchCableOdMmMax].value", "key": "branchCableOdMmMax", "labelZh": "支线电缆外径上限", "unit": "mm", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "filterKind": "od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 11, "observedInV7": true }, { "path": "family.variants[].properties[branchWireAreaMm2Max].value", "key": "branchWireAreaMm2Max", "labelZh": "支线每芯导体截面积上限", "unit": "mm²/芯", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 11, "observedInV7": true }, { "path": "family.variants[].properties[cableOdMmMax].value", "key": "cableOdMmMax", "labelZh": "电缆护套外径上限", "unit": "mm", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "filterKind": "od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 31, "observedInV7": true }, { "path": "family.variants[].properties[cableOdMmMin].value", "key": "cableOdMmMin", "labelZh": "电缆护套外径下限", "unit": "mm", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "filterKind": "od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 18, "observedInV7": true }, { "path": "family.variants[].properties[cableOdPublished].value", "key": "cableOdPublished", "labelZh": "电缆外径原文选项", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[cableOdPublishedByProductColumn].value", "key": "cableOdPublishedByProductColumn", "labelZh": "逐产品列电缆外径原文", "unit": null, "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "family.variants[].properties[catalogIpByProductColumn].value", "key": "catalogIpByProductColumn", "labelZh": "逐产品列IP等级", "unit": null, "dataTypes": [ "object" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "family.variants[].properties[catalogIpRating].value", "key": "catalogIpRating", "labelZh": "目录IP等级原文", "unit": null, "dataTypes": [ "null", "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "按具体IP声明、插合状态与试验条件匹配；IP不是可直接数字排序的标量。IP68不证明IP69K；IP65/IP67备选声明不能自动认为每SKU两者兼得。广告IP68、缺条件或冲突不能硬通过。", "filterKind": "ip", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 45, "observedInV7": true }, { "path": "family.variants[].properties[certificationScope].value", "key": "certificationScope", "labelZh": "认证覆盖范围", "unit": null, "dataTypes": [ "null" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "family.variants[].properties[contactDiameterByPinGroups].value", "key": "contactDiameterByPinGroups", "labelZh": "逐芯数组的端子直径", "unit": "mm", "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[contactDiameterMm].value", "key": "contactDiameterMm", "labelZh": "接触端子直径", "unit": "mm", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 4, "observedInV7": true }, { "path": "family.variants[].properties[contactMaterial].value", "key": "contactMaterial", "labelZh": "接触件材料", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅具体SKU/明确变体证据可做材料或镀层的精确筛选；系列宣传和模型颜色只作展示，不能继承。镀层厚度未公布保持null。", "filterKind": "material", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[contactPlating].value", "key": "contactPlating", "labelZh": "接触件镀层", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅具体SKU/明确变体证据可做材料或镀层的精确筛选；系列宣传和模型颜色只作展示，不能继承。镀层厚度未公布保持null。", "filterKind": "material", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 12, "observedInV7": true }, { "path": "family.variants[].properties[contactResistanceMilliOhmMax].value", "key": "contactResistanceMilliOhmMax", "labelZh": "接触电阻声明上限", "unit": "mΩ", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅来源明确≤关系时，可按声明接触电阻上限≤客户允许上限比较；原表只有0.2无比较符时应作为声明值显示，不宣称max保证。", "filterKind": "resistance_max", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "family.variants[].properties[currentByPins].value", "key": "currentByPins", "labelZh": "逐芯数额定电流表", "unit": "A/触点", "dataTypes": [ "object" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[currentOptionsA].value", "key": "currentOptionsA", "labelZh": "系列电流选项", "unit": "A/触点", "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[electromagneticShieldDb].value", "key": "electromagneticShieldDb", "labelZh": "电磁屏蔽衰减", "unit": "dB", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "只在试验标准/条件相同且作用域覆盖该SKU时比较；单一时长、dB、频率或加速度不能说明通用更高等级。", "filterKind": "qualification", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[electromagneticShieldFrequencyMHz].value", "key": "electromagneticShieldFrequencyMHz", "labelZh": "屏蔽测试频率", "unit": "MHz", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[flammabilityClass].value", "key": "flammabilityClass", "labelZh": "阻燃等级", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅具体SKU/明确变体证据可做材料或镀层的精确筛选；系列宣传和模型颜色只作展示，不能继承。镀层厚度未公布保持null。", "filterKind": "material", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[housingMaterial].value", "key": "housingMaterial", "labelZh": "壳体材料", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅具体SKU/明确变体证据可做材料或镀层的精确筛选；系列宣传和模型颜色只作展示，不能继承。镀层厚度未公布保持null。", "filterKind": "material", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 12, "observedInV7": true }, { "path": "family.variants[].properties[hvil].value", "key": "hvil", "labelZh": "高压互锁HVIL", "unit": null, "dataTypes": [ "boolean" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅明确适用该SKU且值为true才能满足所需功能；null表示未公布，不按false或true处理。", "filterKind": "boolean", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[impactAccelerationPublished].value", "key": "impactAccelerationPublished", "labelZh": "冲击加速度原文", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "只在试验标准/条件相同且作用域覆盖该SKU时比较；单一时长、dB、频率或加速度不能说明通用更高等级。", "filterKind": "qualification", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 5, "observedInV7": true }, { "path": "family.variants[].properties[insulationResistanceCondition].value", "key": "insulationResistanceCondition", "labelZh": "绝缘电阻测试条件", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[insulationResistanceMOhmMin].value", "key": "insulationResistanceMOhmMin", "labelZh": "绝缘电阻下限", "unit": "MΩ", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "在相同测试条件下，绝缘电阻公布下限≥客户最低要求；条件缺失时不能作完整确认。", "filterKind": "insulation_min", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "family.variants[].properties[insulatorMaterial].value", "key": "insulatorMaterial", "labelZh": "绝缘体材料", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅具体SKU/明确变体证据可做材料或镀层的精确筛选；系列宣传和模型颜色只作展示，不能继承。镀层厚度未公布保持null。", "filterKind": "material", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "family.variants[].properties[ipMatedCondition].value", "key": "ipMatedCondition", "labelZh": "IP声明插合/安装条件", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 5, "observedInV7": true }, { "path": "family.variants[].properties[ipTestDepthM].value", "key": "ipTestDepthM", "labelZh": "IP浸水试验深度", "unit": "m", "dataTypes": [ "null" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "family.variants[].properties[ipTestDurationMin].value", "key": "ipTestDurationMin", "labelZh": "IP试验持续时间", "unit": "min", "dataTypes": [ "null" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": true }, { "path": "family.variants[].properties[ipTestPressureBar].value", "key": "ipTestPressureBar", "labelZh": "IP试验水压", "unit": "bar", "dataTypes": [ "null" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "family.variants[].properties[ipTestTemperatureC].value", "key": "ipTestTemperatureC", "labelZh": "IP试验水温", "unit": "°C", "dataTypes": [ "null" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "family.variants[].properties[mainCableOdMmMax].value", "key": "mainCableOdMmMax", "labelZh": "主线电缆外径上限", "unit": "mm", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "filterKind": "od", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 11, "observedInV7": true }, { "path": "family.variants[].properties[mainWireAreaMm2Max].value", "key": "mainWireAreaMm2Max", "labelZh": "主线每芯导体截面积上限", "unit": "mm²/芯", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 11, "observedInV7": true }, { "path": "family.variants[].properties[mechanicalLifeCycles].value", "key": "mechanicalLifeCycles", "labelZh": "目录机械插拔次数", "unit": "次", "dataTypes": [ "null", "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "公布插拔次数≥客户循环需求可作目录预选；原文未说Min时不得改成保证下限，须保持寿命试验条件未知。", "filterKind": "life", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 38, "observedInV7": true }, { "path": "family.variants[].properties[mechanicalLifeCyclesMin].value", "key": "mechanicalLifeCyclesMin", "labelZh": "明确最小机械插拔次数", "unit": "次", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "公布插拔次数≥客户循环需求可作目录预选；原文未说Min时不得改成保证下限，须保持寿命试验条件未知。", "filterKind": "life", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[operatingTemperatureCMax].value", "key": "operatingTemperatureCMax", "labelZh": "工作温度上限（目录字段）", "unit": "°C", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "filterKind": "temperature", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 45, "observedInV7": true }, { "path": "family.variants[].properties[operatingTemperatureCMin].value", "key": "operatingTemperatureCMin", "labelZh": "工作温度下限（目录字段）", "unit": "°C", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "filterKind": "temperature", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 45, "observedInV7": true }, { "path": "family.variants[].properties[panelThicknessMmMax].value", "key": "panelThicknessMmMax", "labelZh": "适配面板厚度上限", "unit": "mm", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "所选面板厚度/公差区间必须被明确的面板适配范围包容；仅max声明不能补造min。不能与配对电缆OD混用。", "filterKind": "panel", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 8, "observedInV7": true }, { "path": "family.variants[].properties[panelThicknessMmMin].value", "key": "panelThicknessMmMin", "labelZh": "适配面板厚度下限", "unit": "mm", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "尺寸与接线区域分栏呈现；护套OD、每芯导体、胶圈孔径、面板厚度分别命名。", "filterRule": "所选面板厚度/公差区间必须被明确的面板适配范围包容；仅max声明不能补造min。不能与配对电缆OD混用。", "filterKind": "panel", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 6, "observedInV7": true }, { "path": "family.variants[].properties[panelThicknessPublished].value", "key": "panelThicknessPublished", "labelZh": "面板厚度原文", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "family.variants[].properties[pinCount].value", "key": "pinCount", "labelZh": "该规格限定芯数", "unit": "芯", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "精确匹配pinConfig（如2+3不能替换为5）；总芯数仅辅助。选项必须来自当前系列实际记录。", "filterKind": "pin", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "family.variants[].properties[pinCounts].value", "key": "pinCounts", "labelZh": "该规格限定芯数集合", "unit": "芯", "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "精确匹配pinConfig（如2+3不能替换为5）；总芯数仅辅助。选项必须来自当前系列实际记录。", "filterKind": "pin", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[ratedCurrentA].value", "key": "ratedCurrentA", "labelZh": "每触点额定电流", "unit": "A/触点", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "每个相关触点组分别满足目录额定电流≥客户该组每芯电流；不能跨组求和、不能采用系列最大电流。额定条件缺失时只作预选。", "filterKind": "current", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 14, "observedInV7": true }, { "path": "family.variants[].properties[ratedVoltageSystem].value", "key": "ratedVoltageSystem", "labelZh": "额定电压AC/DC制式（技术表）", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "family.variants[].properties[ratedVoltageV].value", "key": "ratedVoltageV", "labelZh": "额定电压", "unit": "V", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "每个相关触点组分别满足额定电压≥客户该组电压；还需相同AC/DC及所需条件。AC/DC未标注时不得声称该制式已确认。", "filterKind": "voltage", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 21, "observedInV7": true }, { "path": "family.variants[].properties[ratings].value", "key": "ratings", "labelZh": "按产品型式的电气额定表", "unit": null, "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "family.variants[].properties[ratingsByPin].value", "key": "ratingsByPin", "labelZh": "逐芯数额定表", "unit": null, "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "family.variants[].properties[ratingsByPins].value", "key": "ratingsByPins", "labelZh": "逐芯数额定表", "unit": null, "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "family.variants[].properties[relativeHumidityPct].value", "key": "relativeHumidityPct", "labelZh": "相对湿度", "unit": "%", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "只在试验标准/条件相同且作用域覆盖该SKU时比较；单一时长、dB、频率或加速度不能说明通用更高等级。", "filterKind": "qualification", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 4, "observedInV7": true }, { "path": "family.variants[].properties[relativeHumidityTestTemperatureC].value", "key": "relativeHumidityTestTemperatureC", "labelZh": "相对湿度试验温度", "unit": "°C", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 4, "observedInV7": true }, { "path": "family.variants[].properties[saltSprayHours].value", "key": "saltSprayHours", "labelZh": "盐雾试验时长", "unit": "h", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "只在试验标准/条件相同且作用域覆盖该SKU时比较；单一时长、dB、频率或加速度不能说明通用更高等级。", "filterKind": "qualification", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 6, "observedInV7": true }, { "path": "family.variants[].properties[sealMaterial].value", "key": "sealMaterial", "labelZh": "密封材料", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "仅具体SKU/明确变体证据可做材料或镀层的精确筛选；系列宣传和模型颜色只作展示，不能继承。镀层厚度未公布保持null。", "filterKind": "material", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 5, "observedInV7": true }, { "path": "family.variants[].properties[vibrationAccelerationMps2].value", "key": "vibrationAccelerationMps2", "labelZh": "振动加速度", "unit": "m/s²", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "只在试验标准/条件相同且作用域覆盖该SKU时比较；单一时长、dB、频率或加速度不能说明通用更高等级。", "filterKind": "qualification", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "family.variants[].properties[vibrationFrequencyHzMax].value", "key": "vibrationFrequencyHzMax", "labelZh": "振动频率上限", "unit": "Hz", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "只在试验标准/条件相同且作用域覆盖该SKU时比较；单一时长、dB、频率或加速度不能说明通用更高等级。", "filterKind": "qualification", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "family.variants[].properties[vibrationFrequencyHzMin].value", "key": "vibrationFrequencyHzMin", "labelZh": "振动频率下限", "unit": "Hz", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "只在试验标准/条件相同且作用域覆盖该SKU时比较；单一时长、dB、频率或加速度不能说明通用更高等级。", "filterKind": "qualification", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "family.variants[].properties[wireAreaMaxByPins].value", "key": "wireAreaMaxByPins", "labelZh": "逐芯数导体截面积上限", "unit": "mm²/芯", "dataTypes": [ "object" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 4, "observedInV7": true }, { "path": "family.variants[].properties[wireAreaMm2Max].value", "key": "wireAreaMm2Max", "labelZh": "每芯导体截面积上限", "unit": "mm²/芯", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 8, "observedInV7": true }, { "path": "family.variants[].properties[wireAreaOptionsMm2].value", "key": "wireAreaOptionsMm2", "labelZh": "导体截面积选项", "unit": "mm²/芯", "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "family.variants[].properties[wireAreaRelation].value", "key": "wireAreaRelation", "labelZh": "导体声明关系", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "SKU详情/比较表按触点组逐行展示；保留≤/离散选项与未知标记。", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "filterKind": "area", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "family.variants[].properties[wireCurrentPairs].value", "key": "wireCurrentPairs", "labelZh": "电流与适配导体组合", "unit": null, "dataTypes": [ "array" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "工程参数面板展开为子表，逐列/芯数组保留原值及来源，不压缩为一个最大值。", "filterRule": "这是跨芯数/产品列/端子组合的表，前端展开所有条目并显示作用域；只有精确命中SKU、列、芯数及组以后才能抽取子值，禁止全表最大值继承。", "filterKind": "compound", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 5, "observedInV7": true }, { "path": "family.variants[].properties[withstandVoltageSystem].value", "key": "withstandVoltageSystem", "labelZh": "耐压AC/DC制式", "unit": null, "dataTypes": [ "string" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "这是测试/工作条件，须与被比较主值一起呈现和匹配；未有配套主值或不相同条件不能独立宣称满足。", "filterKind": "condition", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "family.variants[].properties[withstandVoltageV].value", "key": "withstandVoltageV", "labelZh": "耐压试验电压", "unit": "V", "dataTypes": [ "number" ], "scope": "family/variant的scope限定；默认不得自动赋给整系列SKU。", "frontendPresentation": "系列工程参数页展示原值、单位、适用变体、PDF页和备注；仅确切归属后进入SKU详情。", "filterRule": "耐压值≥客户试验要求，同时AC/DC、试验时长及条件一致；不能用耐压替代额定工作电压。", "filterKind": "withstand", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 7, "observedInV7": true }, { "path": "catalogProperty.key", "key": "key", "labelZh": "参数键", "unit": null, "dataTypes": [ "string" ], "scope": "单个目录参数证据对象；与其value绑定。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 502, "observedInV7": true }, { "path": "catalogProperty.label", "key": "label", "labelZh": "参数中文名", "unit": null, "dataTypes": [ "string" ], "scope": "单个目录参数证据对象；与其value绑定。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 502, "observedInV7": true }, { "path": "catalogProperty.value", "key": "value", "labelZh": "原始结构化参数值", "unit": null, "dataTypes": [ "array", "boolean", "null", "number", "object", "string" ], "scope": "单个目录参数证据对象；与其value绑定。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 492, "observedInV7": true }, { "path": "catalogProperty.unit", "key": "unit", "labelZh": "参数单位", "unit": null, "dataTypes": [ "null", "string" ], "scope": "单个目录参数证据对象；与其value绑定。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 354, "observedInV7": true }, { "path": "catalogProperty.scope", "key": "scope", "labelZh": "参数适用作用域", "unit": null, "dataTypes": [ "object" ], "scope": "单个目录参数证据对象；与其value绑定。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 502, "observedInV7": true }, { "path": "catalogProperty.sourcePage", "key": "sourcePage", "labelZh": "1起算PDF页号", "unit": null, "dataTypes": [ "number" ], "scope": "单个目录参数证据对象；与其value绑定。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 502, "observedInV7": true }, { "path": "catalogProperty.sourcePages", "key": "sourcePages", "labelZh": "PDF来源页号数组", "unit": null, "dataTypes": [ "array" ], "scope": "单个目录参数证据对象；与其value绑定。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 502, "observedInV7": true }, { "path": "catalogProperty.notes", "key": "notes", "labelZh": "参数备注", "unit": null, "dataTypes": [ "array" ], "scope": "单个目录参数证据对象；与其value绑定。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 502, "observedInV7": true }, { "path": "scope.sourcePageIn", "key": "sourcePageIn", "labelZh": "允许继承的PDF页号集合", "unit": null, "dataTypes": [ "array" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 55, "observedInV7": true }, { "path": "scope.skuIn", "key": "skuIn", "labelZh": "允许继承的SKU集合", "unit": null, "dataTypes": [ "array" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "scope.pinCount", "key": "pinCount", "labelZh": "该规格限定芯数", "unit": "芯", "dataTypes": [ "number" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "产品卡、详情标题及对应分类/精确配置控件；选项只来自当前数据集合。", "filterRule": "精确匹配pinConfig（如2+3不能替换为5）；总芯数仅辅助。选项必须来自当前系列实际记录。", "filterKind": "pin", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "scope.pinCountIn", "key": "pinCountIn", "labelZh": "允许继承的芯数集合", "unit": null, "dataTypes": [ "array" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 1, "observedInV7": true }, { "path": "scope.productColumn", "key": "productColumn", "labelZh": "适用产品列名称", "unit": null, "dataTypes": [ "string" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 4, "observedInV7": true }, { "path": "scope.productColumnIn", "key": "productColumnIn", "labelZh": "适用产品列序号集合", "unit": null, "dataTypes": [ "array" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 2, "observedInV7": true }, { "path": "scope.productColumnLabel", "key": "productColumnLabel", "labelZh": "适用产品列中文标签", "unit": null, "dataTypes": [ "string" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 15, "observedInV7": true }, { "path": "scope.mayInheritToSku", "key": "mayInheritToSku", "labelZh": "是否允许继承到SKU", "unit": null, "dataTypes": [ "boolean" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 36, "observedInV7": true }, { "path": "scope.evidenceScope", "key": "evidenceScope", "labelZh": "证据的系列/广告/冲突范围", "unit": null, "dataTypes": [ "string" ], "scope": "继承匹配器的AND条件；未知键不能忽略。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 21, "observedInV7": true }, { "path": "familyEvidence.family", "key": "family", "labelZh": "目录系列", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.seriesOptions", "key": "seriesOptions", "labelZh": "系列可选型式", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.specifications", "key": "specifications", "labelZh": "原始键值规格对象", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.variants", "key": "variants", "labelZh": "有独立作用域的规格组", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.groups", "key": "groups", "labelZh": "原始证据分组", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.properties", "key": "properties", "labelZh": "字段化参数列表", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "SKU/系列参数详情展示原值及单位；null显示“未公布/待确认”，禁止显示0或“支持”。", "filterRule": "原文/选项/备注展示，未归属到具体SKU或触点组前不进入硬筛选。", "filterKind": "source_only", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.scopeRules", "key": "scopeRules", "labelZh": "继承约束", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.applicability", "key": "applicability", "labelZh": "原始适用条件", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.inheritance", "key": "inheritance", "labelZh": "可继承范围文字", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "参数来源旁的适用范围标签；完整条件在展开详情可见。", "filterRule": "继承条件必须全部命中且受支持。mayInheritToSku=false或广告/冲突evidenceScope禁止自动继承；未知约束键保守不继承。", "filterKind": "scope", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.schemaVersion", "key": "schemaVersion", "labelZh": "数据字典版本", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.sourcePageCount", "key": "sourcePageCount", "labelZh": "源PDF总页数", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.extractionMethod", "key": "extractionMethod", "labelZh": "提取方法", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.inheritancePolicy", "key": "inheritancePolicy", "labelZh": "全局继承政策", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.ipPolicy", "key": "ipPolicy", "labelZh": "IP判断政策", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.reviewedPdfPages", "key": "reviewedPdfPages", "labelZh": "视觉核查并引用的PDF页", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false }, { "path": "familyEvidence.displaySchema", "key": "displaySchema", "labelZh": "前端呈现结构约定", "unit": null, "dataTypes": [ "null" ], "scope": "系列证据容器/全局政策；不作为SKU实测参数。", "frontendPresentation": "来源/边界证据面板；冲突在相关参数旁显著标注，资料照片标注目录示意与页码。", "filterRule": "在证据区完整展示并链接来源；不作工程数值筛选。PDF页号1起算且必须与印刷页号分开。", "filterKind": "provenance", "nullMeaning": "未公布、无法归属或冲突；不等于0、无、可支持或不可支持。", "observedNonNullCount": 0, "observedInV7": false } ], "requirementFields": [ { "path": "requirement.series", "labelZh": "目标系列", "unit": null, "filterRule": "精确选择当前已收录系列", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.pinConfig", "labelZh": "目标芯位", "unit": null, "filterRule": "精确配置字符串，混合组不能只比较总针数", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.locking", "labelZh": "锁紧方式", "unit": null, "filterRule": "螺纹/快卡（卡口）/自锁分别匹配，不能与端接混为一谈", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.termination", "labelZh": "端接方式", "unit": null, "filterRule": "焊线/螺丝锁线/免焊免螺丝快接/注塑带线分别匹配", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.mounting", "labelZh": "安装方式", "unit": null, "filterRule": "线对线、面板前装、面板后装、法兰、分线拓扑分别匹配", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.groups[].role", "labelZh": "负载组用途", "unit": null, "filterRule": "all/power/signal分别定位", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.groups[].count", "labelZh": "该负载组芯数", "unit": "芯", "filterRule": "与目标触点组数量精确/明确兼容", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.groups[].currentA", "labelZh": "该组每芯工作电流", "unit": "A/芯", "filterRule": "每个相关触点组分别满足目录额定电流≥客户该组每芯电流；不能跨组求和、不能采用系列最大电流。额定条件缺失时只作预选。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.groups[].voltageV", "labelZh": "该组工作电压", "unit": "V", "filterRule": "每个相关触点组分别满足额定电压≥客户该组电压；还需相同AC/DC及所需条件。AC/DC未标注时不得声称该制式已确认。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.groups[].electricalSystem", "labelZh": "该组AC/DC制式", "unit": null, "filterRule": "原文明确制式才算确认；未知单列待确认", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.groups[].wireAreaMm2", "labelZh": "该组每芯实际截面积", "unit": "mm²/芯", "filterRule": "按每芯导体截面积匹配：maximum且已公布上限≥客户实际截面积，可列入上限预选；下限仍为null，不能伪造0起范围。range须整体包容客户区间；options须精确属于公布选项。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.groups[].awg", "labelZh": "该组实际AWG编号", "unit": "AWG编号", "filterRule": "仅用明确发布的AWG编号范围或离散选项；编号比较是区间包含，不能把AWG数值越大理解为导体越粗，不能用mm²换算填充未知AWG。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.cableOdMmMin", "labelZh": "客户护套外径公差下限", "unit": "mm", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.cableOdMmMax", "labelZh": "客户护套外径公差上限", "unit": "mm", "filterRule": "确认密封匹配要求该接线端的已公布OD区间完整包容客户护套OD/公差区间；只有最大值而无下限只能做未确认的上限预选，不能硬通过密封筛选。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.availableWidthMm", "labelZh": "可用安装宽度", "unit": "mm", "filterRule": "产品已公布尺寸≤客户可用空间；宽度按该图方向，长度按整体长度。参考尺寸需标明，缺失或公差未知只能待确认。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.availableLengthMm", "labelZh": "可用安装长度", "unit": "mm", "filterRule": "产品已公布尺寸≤客户可用空间；宽度按该图方向，长度按整体长度。参考尺寸需标明，缺失或公差未知只能待确认。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.availableDiameterMm", "labelZh": "可用圆孔/包络直径", "unit": "mm", "filterRule": "仅与明确maxBodyDiameterMm或对应开孔图比，不能用系列M数代替", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.panelThicknessMmMin", "labelZh": "客户面板厚度下限", "unit": "mm", "filterRule": "所选面板厚度/公差区间必须被明确的面板适配范围包容；仅max声明不能补造min。不能与配对电缆OD混用。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.panelThicknessMmMax", "labelZh": "客户面板厚度上限", "unit": "mm", "filterRule": "所选面板厚度/公差区间必须被明确的面板适配范围包容；仅max声明不能补造min。不能与配对电缆OD混用。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.operatingTemperatureMinC", "labelZh": "应用最低温度", "unit": "°C", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.operatingTemperatureMaxC", "labelZh": "应用最高温度", "unit": "°C", "filterRule": "产品温度下限≤客户最低温度，且产品上限≥客户最高温度；两个方向共同满足。别名先归一化，冲突保留null。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.matingCycles", "labelZh": "要求插拔次数", "unit": "次", "filterRule": "公布插拔次数≥客户循环需求可作目录预选；原文未说Min时不得改成保证下限，须保持寿命试验条件未知。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.requiredIpCode", "labelZh": "所需IP代码", "unit": null, "filterRule": "按具体IP声明、插合状态与试验条件匹配；IP不是可直接数字排序的标量。IP68不证明IP69K；IP65/IP67备选声明不能自动认为每SKU两者兼得。广告IP68、缺条件或冲突不能硬通过。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.matedOrUnmated", "labelZh": "防水使用插合状态", "unit": null, "filterRule": "与证据的连接/封帽/安装状态一致", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.waterDepthM", "labelZh": "浸水深度", "unit": "m", "filterRule": "比对原IP试验条件；缺条件则待确认", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.durationMin", "labelZh": "浸水/冲洗持续时间", "unit": "min", "filterRule": "不能从IP68代码自行推导", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.waterTemperatureC", "labelZh": "水温", "unit": "°C", "filterRule": "IP69K高温冲洗须独立条件证据", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.pressureBar", "labelZh": "冲洗压力", "unit": "bar", "filterRule": "IP69K高压条件须独立证据", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.jetDistanceMm", "labelZh": "喷嘴距离", "unit": "mm", "filterRule": "目录未给则待确认", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.chemicalExposure", "labelZh": "化学介质暴露", "unit": null, "filterRule": "材料名不能替代耐化学试验", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.contactResistanceMaxMilliOhm", "labelZh": "允许接触电阻上限", "unit": "mΩ", "filterRule": "仅来源明确≤关系时，可按声明接触电阻上限≤客户允许上限比较；原表只有0.2无比较符时应作为声明值显示，不宣称max保证。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.insulationResistanceMinMOhm", "labelZh": "要求绝缘电阻下限", "unit": "MΩ", "filterRule": "在相同测试条件下，绝缘电阻公布下限≥客户最低要求；条件缺失时不能作完整确认。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" }, { "path": "requirement.withstandVoltageV", "labelZh": "耐压试验要求", "unit": "V", "filterRule": "耐压值≥客户试验要求，同时AC/DC、试验时长及条件一致；不能用耐压替代额定工作电压。", "validation": "电流/电压/长度/截面积/次数/压力必须有限且>0；AWG必须整数且来自支持输入范围；温度可为负；上下界不能倒置。" } ], "aliasNormalization": [ { "canonical": "temperatureMinC", "inputs": [ "operatingTemperatureCMin", "operatingTemperatureMinC", "temperatureMinC" ], "rule": "逐来源归一化；不冲突才采用；已有明确SKU证据优先，冲突不由族值覆盖。" }, { "canonical": "temperatureMaxC", "inputs": [ "operatingTemperatureCMax", "operatingTemperatureMaxC", "temperatureMaxC" ], "rule": "同上。" }, { "canonical": "mechanicalLifeCycles", "inputs": [ "mechanicalLifeCycles", "matingCyclesMin" ], "rule": "保留原文关系；不因为字段Min后缀自动宣称最小保证值。" }, { "canonical": "sourcePrintedPage", "inputs": [ "sourcePrintedPage", "printedPage" ], "rule": "只有可证为同一个PDF页的印刷页才归一化，绝不与sourcePage混淆。" }, { "canonical": "catalogIpRating", "inputs": [ "catalogIpRating", "ipRating" ], "rule": "保留证据来源；不冲突才显示一致值，官网与目录冲突必须并列原文。" } ], "matchingOutcomeStates": [ "confirmed_preselection", "upper_bound_preselection", "unknown_pending_confirmation", "conflict_pending_confirmation", "does_not_match" ], "scopeEvaluation": { "operator": "AND", "denyEvidenceScopes": [ "family_marketing_only", "table_only_pending_sku_alignment", "conflicting_family_block", "family_table_only" ], "denyFlag": "mayInheritToSku=false", "unknownConstraint": "fail_closed", "constraints": [ "sourcePageIn", "skuIn", "pinCount", "pinCountIn", "productColumn", "productColumnIn", "productColumnLabel" ], "notes": "需要明确来源列标识；不能仅凭termination包含塑或mounting包含面板推定全部产品列。" }, "artifactFiles": { "version": "V7", "dictionary": "selector-schema-v7.json", "appendix": "V7结构化参数与呈现附录.md", "products": "selector-products.json", "families": "family-specs-v7.json", "newRecords": "new-catalog-records-v7.json", "sourceConflicts": "catalog-conflicts-v7.json", "scopeAudit": "scope-audit-v7.json", "assetManifest": "catalog-assets/asset-manifest-v7.json" } }